Payment & Shipping Terms:
|Application Method:||Electrostatic Spray Powder Coating||Main Type:||Epoxy Polyester Powder Coating|
|Delivery Detail:||2-5 Days After Payment||Application:||For Powder Coating|
|Feature:||High Reliability||Use:||Spray Gun|
Manual Portable Powder Coating Multipurpose Chemicals Resistance Weatherability
Manual portable Thermoset Powder Coating system electrostatic paint spray gun
Powder coating machine (MA)
• Powder coating is tougher than conventional paint,easy to use and clean up and covers better
• System provides a minimum 80% transfer efficiency
• 1/4 NPS air inlet
• 10-30 PSI input air pressure
What is Powder Coating?
Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.
Most powder coating is used by electrostatic spraying on metal surface, and then cure in oven, eventually form a solid layer.
Powder Coating Test Gun Description
1. Supply Voltage:120-240VAC 50-60HZ
2. Output high pressure:8-30KV
3. Air joint:1/4Inch
4. Powder spraying speed:1.2m²/min
6. dimensions (L*W*H):42cm*30.5cm*26.5cm*
Applications of Product
|♦ Electrical Household Appliances||♦ Aerospace Area|
|♦ Automotive Electronics||♦ Fitness Equipment|
|♦ Track Traffic||♦ Medical Devices|
|♦ Petroleum Pipes, Valve||♦ Tools & Hardware|
|♦ LED Lights, Outdoor Lamps||♦ Radiator & Heat Sink|
|♦ Glass Decoration||♦ External Facilities|
♦ Powder coatings are based on Resin,Pigments,Curing Agents,Additives.
♦ Resin(including Epoxy, polyester, hybrid)giving the basic performance to the coating.
♦ Pigments, Providing the colour and effects, such as metallic or hammer.
♦ Curing Agents, reacts with the resin to form a continuous protective film.
♦ Additives, can be used to promote variations in the performance or surface effects.
Contact Person: Arya