Payment & Shipping Terms:
|Main Raw Material:||Epoxy, Polyester ,epoxy Polyester Etc||Application Method:||Electrostatic Spray|
|State:||Powder Coating||Gloss:||High Gloos/semi Gloss/matt/texture/candy|
|Main Type:||Epoxy ,polyester ,epoxy Polyester Powder Coating||Raw Materials Brand:||DSM Resin , Dupont Etc|
|Particle Size:||Average 30-65μm||Texture:||Water Textured Red Black|
textured powder coating finishes,
crackle finish powder coating
Aluminium Diy Dry Powder Coating Exterior Durability With ISO 9001 Certification
The main finish reflects the gloss level of the final product, usually being Gloss, Semi-gloss or Matt. There is also the choice between Flat finish, Rough finish, Texture finish, Metallic finish.
When choosing metallic powders Woncheng always use the more expensive bonded powders as this gives a more uniform spread of metallic particles on the end product. If your product requires a metallic finish always ask if the powder is bonded or not.
Epoxy powder coating
Epoxy/Polyester Hybrid powder coating
Polyester/TGIC powder coating
Polyester/ Primid powder coating
Acrylic acid powder coating
Polyurethane powder coating
Antistatic powder coating
Antibacterial powder coating
Metallic powder coating
Epoxy Powder Coating; Polyester Powder Coating;
Epoxy-Polyester Powder Coating
|Surface Finish||Superior gloss and color retention|
|Particle Size||Average 32-42μm|
|Specific Gravity||1.2-1.7g per cubic meter|
|Coverage||8-10 square meters per Kg at 30-90 μm film thickness|
|Film thickness||Not less than 100μm|
|Application Voltage||60-90 KV|
|Gun to Component Distance||15-30CM|
|Curing Temperature||180-200℃,10 min-15 min|
|Store in ventilated, dry, clean room, temperature < 25℃||Relative humidity 50-65%|
|Away from direct sunlight, fire, heat||For best performance, use within 6 months|
|Trade Terms||FOB, CIF, CRF, CNF|
|Payment Terms||T/T, L/C, West Union, PayPal etc.|
|Delivery time||3-7 days after payment|
|Packaging||Size: 39*26*43 (unit:cm) Weight: N.W. 25kg G.W. 26kg|
|Shipping||By sea, by air, by courier|
· Powder coating can be applied to most metal components including steel, Zinc, brass and aluminium.
· The durable finish provides a surface finish which is less prone to chipping, marking and scratching.
· Powder coating can be applied to components used internally and externally.
Contact Person: Arya