Manual Portable Powder Coating

Manual portable Thermoset Powder Coating system electrostatic paint spray gun

Product model:

Powder coating machine (MA)

• Powder coating is tougher than conventional paint,easy to use and clean up and covers better

• System provides a minimum 80% transfer efficiency

• 1/4 NPS air inlet

• 10-30 PSI input air pressure

What is Powder Coating?

Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.

Most powder coating is used by electrostatic spraying on metal surface, and then cure in oven, eventually form a solid layer.

Powder Coating Test Gun Description

1.  Supply Voltage:120-240VAC 50-60HZ

2.  Output high pressure:8-30KV

3.  Air joint:1/4Inch

4.  Powder spraying speed:1.2m²/min

5.  Weight:3kg

6. dimensions (L*W*H):42cm*30.5cm*26.5cm*

Applications of Product

♦  Powder coatings are based on Resin,Pigments,Curing Agents,Additives.

♦  Resin(including Epoxy, polyester, hybrid)giving the basic performance to the coating.

♦  Pigments, Providing the colour and effects, such as metallic or hammer.

♦  Curing Agents, reacts with the resin to form a continuous protective film.

♦  Additives, can be used to promote variations in the performance or surface effects.