Payment & Shipping Terms:
|Main Raw Material:||Epoxy, Polyester ,epoxy Polyester Etc||Application Method:||Electrostatic Spray|
|Color:||Black||Gloss:||High Gloos/semi Gloss/matt/texture/candy|
|Main Type:||Epoxy ,polyester ,epoxy Polyester Powder Coating||Curing:||180-200℃,10 Min-15 Min|
|Particle Size:||Average 30-42μm||Texture:||Hammer Tone Red Black|
powder coat hammertone,
protective powder coating
High Performance Hammertone Powder Coat No Pollution Corrosion Protection
Standard type: 180oC/15 minutes
Or 160oC/20 minutes, 200oC/10 minutes if customer require
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:
Epoxy Powder Coating; Polyester Powder Coating;
Epoxy-Polyester Powder Coating
|Surface Finish||Superior gloss and color retention|
|Particle Size||Average 32-42μm|
|Specific Gravity||1.2-1.7g per cubic meter|
|Coverage||8-10 square meters per Kg at 30-90 μm film thickness|
|Film thickness||Not less than 100μm|
|Application Voltage||60-90 KV|
|Gun to Component Distance||15-30CM|
|Curing Temperature||180-200℃,10 min-15 min|
|Store in ventilated, dry, clean room, temperature < 25℃||Relative humidity 50-65%|
|Away from direct sunlight, fire, heat||For best performance, use within 6 months|
Trade items of Products
|Trade terms||FOB, CIF,CRF,CNF|
|Payment terms||T/T, L/C , West Union ,Moneygram , Paypal etc|
|Payment condition||30% deposit in advance,70% balance before shipment|
|Delivery time||3-7 days after deposit|
|Shipping||By sea, by air and by express delivery|
|Sample Powder will be delivery by courier ,like DHL,UPS,FEDEX etc. 5-8 DAYS to arrival|
|Official Order Powder will be ship by SEA .15-30 DAYS to arrival|
A wide range of finishes and colours including metallic, glossy, rough and textured.
· Corrosion resistance.
· Powder coating can be applied to most metal components including steel, Zinc, brass and aluminium.
· The durable finish provides a surface finish which is less prone to chipping, marking and scratching.
· Powder coating can be applied to components used internally and externally.
Contact Person: Tony